Page 2
INSTRUCTIONS CM698 Step 1: Mounting Enclosure to Wall / Electrical Box Installation 1.1 Locate the wall studs (16" on center in most U.S. cases). PANDUIT recommends mounting the top Mounting eyelets of the enclosure at 6’ from the floor. 1.2 Determine if you will be mounting the electrical box in the wall.
Page 3
PZBASE3EPBP) inside PZBASE3E enclosure. 4.2 Secure Back Plate to enclosure with [4] M5 Serrated Hex Nuts (use 8mm socket wrench). [4] M5 Serrated Hex Nuts (use 8mm socket wrench) PZBASE3E ONLY PZBASE3EBP -or- PZBASE3EPBP For Technical Support: www.panduit.com/resources/install_maintain.asp Page 3 of 4...
Page 4
[3] - M6 Hex Head Screws M6 Hex Head Screws (use 10mm socket wrench) 3RU Equipment Mounting Bracket º DIAGONAL ORIENTATION [2] - M6 Hex Head Screws For Instructions in Local Languages E-mail: and Technical Support: techsupport@panduit.com Phone: www.panduit.com/resources/install_maintain.asp 866-405-6654 www.panduit.com Page 4 of 4...