Error Led Is On/Flashing - Epson TM-J7200 Technical Reference Manual

Error LED is On/Flashing

Automatically Recoverable Errors
Error
Roll paper cover open
error
(When automatic
recovery is selected *)
*: Selected by the memory switch.
Recoverable Errors
Error
Roll paper cover open
error
(When possible error
recovery is selected *)
Autocutter error
Carriage error
Cut sheet error
*: Selected by the memory switch.
Unrecoverable Errors
Error
Unrecoverable errors
86
Error description
The Roll paper cover is
LED ON
open during roll paper
LED OFF
print operation.
Error description
The Roll paper cover is
open during roll paper
print operation.
The autocutter does not
operate properly.
The carriage home
position cannot be
detected. Alternatively, the
carriage does not operate
properly.
The cut sheet cannot be
fed.
Error description
An unrecoverable error has occurred.
CAUTION:
Turn off the power immediately when an unrecoverable
error occurs. If the same error occurs again even after turning
the power back on, contact qualified service personnel for
advice.
Error LED flash code
Error LED flash code
Approx. 320 ms
LED ON
LED OFF
Approx. 320 ms
LED ON
LED OFF
Approx. 320 ms
LED ON
LED OFF
Approx. 320 ms
LED ON
LED OFF
Recovery measure
Automatically recovers
when the Roll paper cover
is closed.
Recovery measure
Close the Roll paper cover,
turn the power on to
recover.
Remove the jammed paper
or foreign matter in the
printer, close the Roll paper
cover, turn the power on to
recover.
Remove the jammed paper
or foreign matter in the
printer, close the Front
cover, turn the power on to
recover.
Remove the jammed paper
or foreign matter in the
printer, close the Front
cover, turn the power on to
recover.
Error LED flash code
Approx. 320 ms
LED ON
LED OFF