Slip paper
Paper types
Paper size
Paper thickness
Notes on slip paper
The slip paper must be flat and without curls, folds (especially curls or folds at the top edges), curves, or
wrinkles. Otherwise, it may rub against the print head surface and become dirty.
Because the BOF sensor uses a transmission photo sensor, do not use paper that has holes at the sensor posi-
tion or is translucent.
The TOF sensor uses a reflective photo sensor and detects from the back of the slip. Do not use paper that
has holes or dark portions with low reflection rates (40% or less) at the sensor position.
8 mm {0.31"}
Paper holes prohibited
in this area
Normal paper
68–230 mm {2.68–9.06"} (width) × 68–297 mm {2.68–11.7"} (length)
The minimum size is 68 × 152 mm {2.68 × 5.98"}.
0.09–0.2 mm {0.0035–0.0079"} (only single-ply can be used)
100 mm {3.94"}
8 mm {0.31"}
82 mm {3.23"}
15 mm {0.59"}
Paper feed direction
48 mm {1.89"}
10 mm {0.39"}
Paper holes and
translucence
prohibited in this area
All the numeric values are typical.
Appendix
103