Yardworks 274-1755-6 Instruction Manual page 9

40v cordless axial blower
Table of Contents

Advertisement

16
model no. 274-1755-6 | contact us: 1.866.523.5218
AIR VENTS
Never cover air vents. Keep them free of obstructions and debris. They must always remain
clear for proper motor cooling.
OPERATING AS A BLOWER
Hold the blower firmly. Sweep from side to side with the nozzle several inches above the ground
or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of you. Most
dry blowing operations are better suited to low speeds, rather than high speeds. High-speed
blowing is a better way to move heavier items like large debris or gravel.
CLEANING
-
Remove the battery pack.
• Brush or blow dust and debris out of the air vents using compressed air or a vacuum. Keep
the air vents free of obstructions, sawdust, and wood chips. Do not spray, wash, or immerse
the air vents in water.
• Wipe off the housing and the plastic components using a moist, soft cloth. Do not use strong
solvents or detergents on the plastic housing or plastic components. Certain household
cleaners may cause damage, and may cause a shock hazard.
STORAGE
• Store the unit locked up to prevent unauthorized use or damage.
• Store the unit in a dry, well-ventilated area.
• Store the unit out of the reach of children.
WARNING
: To avoid serious personal injury, do not wear loose-fitting
!
clothing or articles such as scarves, strings,chains, ties, etc., that could
get drawn into the air vents. Tie back long hair to make sure it does not get
drawn into the air vents.
WARNING
:To avoid serious personal injury, always wear gloves to protect
!
yourself from the impeller blades or other sharp objects.
WARNING
:In order to avoid personal injury and the risk of fire and electric
!
shock, remove the battery pack before adjusting, inspecting, or cleaning the
blower.
model no. 274-1755-6 | contact us: 1.866.523.5218
PROBLEM
POSSIBLE CAUSE
Unit will not start.
1. Battery is not secure.
2. Battery is not charged.
3. Defective power switch.
Unit will not blow.
1. Blocked tube.
17
SOLUTION
1. Check to ensure the latches are
tightly secured in to place on the back
of the blower and the battery.
2. Charge the battery pack according
to the
instructions included with your model.
3. Return to place of purchase or
return the
unit to a repair center or call customer
service at 1-886-523-5218.
1. Clear the blockage.

Advertisement

Table of Contents
loading

Table of Contents