Table of Contents
Advertisement
4
model no. 274-1755-6 | contact us: 1.866.523.5218
Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product more efficiently and more safely.
Symbol
Name
V
Volts
A
Amperes
Hz
Hertz
W
Watts
Direct Current
Per Minute
/min
Wet Conditions Alert
Read The Operator's
Manual
Eye Protection
Wear Ear Protection
Safety Alert
Long Hair
Loose Clothing
Impeller Blades
Designation/Explanation
Voltage
Current
Frequency (cycles per second)
Power
Type or a characteristic of current
Revolutions, strokes, surface speed,
orbits etc., per minute
Do not expose to rain or use in damp
locations
To reduce the risk of injury user must
read and understand operator's manu-
al before using this
product.
Wear eye protection when operating
this equipment.
Wear ear protection when operating
this equipment.
Precautions that involve your safety.
Failure to keep long hair away from the
air inlet could result in personal injury.
Failure to keep loose clothing from
being drawn into air intake could result
in personal injury.
Rotating impeller blades can cause
severe injury.
model no. 274-1755-6 | contact us: 1.866.523.5218
The following signal words and meanings are intended to explain the levels of risk
associated with this product.
SYMBOL
SIGNAL
DANGER
Indicates an imminently hazardous situation,
which, if not avoided, will result in death or
serious injury.
WARNING
Indicates a potentially hazardous situation,
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation,
which, if not avoided, may result in minor or
moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situ-
ation that may result in property damage.
WARNING: To avoid serious personal injury, do not attempt to use this prod-
!
uct until you have read this Owner's Manual thoroughly and understand it
completely. If you do not understand the warnings and instructions in this
Owner's Manual, do not use this product. Call 1.866.523.5218 for assistance.
The operation of any power tool can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before
beginning power tool operation, always wear safety goggles or safety
glasses with side shields and, when needed, a full face shield. We recom-
mend a wide vision safety mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is marked to
comply with ANSI Z87.1.
WARNING: Failure to obey a safety WARNING signal CAN result in serious
!
injury to yourself and to others. Always follow the safety precautions to
reduce the risk of fire, electric shock, and personal injury.
WARNING: Remove battery before cleaning or changing accessories.
!
WARNING:
Do
not use on wet materials.
!
WARNING:
Do not block the inlet vent.
!
5
MEANING
Advertisement
Table of Contents
