1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Accessories
  5. MCO-19AIC(UV)
  6. Instruction manual

H 2 Odecontamination 2 Decodecontaminationntaminatiodecontaminationn - Sanyo MCO-19AIC(UV) Instruction Manual

Co2 incubator
Hide thumbs Also See for MCO-19AIC(UV):
Table of Contents

Advertisement

H
O
DECONTAMINATION
2
2
When the chamber has been contaminated, or when cleaning the chamber prior to starting a culture,
H
O
decontamination can be performed using the H
2
2
The following products must be purchased separately in order to perform H
performing H
O
decontamination, check to make sure that these are correctly installed.
2
2
UV Lamp Expansion Kit (MCO-19UVS) (Not required for the MCO-19AIC(UV).)
H
O
Decontamination Kit (MCO-HL)
2
2
H
O
Generator (MCO-HP)
2
2
The H
O
decontamination function decontaminates the chamber and the inner attachments. Do not
2
2
place any objects other than the specified attachments in the chamber during decontamination.
Before performing H
alcohol.
The chamber temperature during H
decontamination, set the upper limit temperature alarm to 50 C or higher.
For the H
O
reagent, use one bottle of the H
2
2
(MCO-H202).
After decontamination, dilute the residual H
large quantity of water and dispose of it, and rinse with distilled water. (Do not wash either the inside or
outside of the H
O
2
2
WARNING
Use the reagent specified by Sanyo for H
cause explosion or damage to the Incubator, or insufficient decontamination.
Do not use chemicals other than the H
to the H
O
Generator.
2
2
WARNING
When performing H
closed. During H
O
2
do so may be harmful to health due to leakage of H
CAUTION
H
O
decontamination can be performed only for the chamber and chamber attachments with standard
2
2
specifications, and not for any other objects.
O
decontamination, clean the chamber and the inner attachments with sterilizing
2
2
O
2
2
Generator with alcohol.)
O
2
2
O
decontamination, make sure that the outer and inner doors are securely
2
2
decontamination, plug the access hole with the silicon cap that is provided. Failure to
2
O
Generator.
2
2
decontamination reaches 45 C. Before performing H
O
Decontamination Reagent specified by Sanyo
2
2
O
Decontamination Reagent in the H
2
2
O
decontamination. Using a different H
2
2
reagent, such as alcohol. Doing so may result in damage
O
gas.
2
2
131
O
decontamination. Before
2
2
2
O
Generator with a
2
2
O
solution may
2
2
O
2
40
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for Sanyo MCO-19AIC(UV)

Related Products for Sanyo MCO-19AIC(UV)

This manual is also suitable for:

Mco-19aic

Table of Contents