Table of Contents
Advertisement
Figure 14 Connecting an AC power cord to the L1000-A
Connecting a DC power cord
1.
Identify the plug for connecting to the L1000-A, correctly orient the plug with the RPS receptacle
on the L1000-A chassis, and insert the plug into the receptacle.
2.
Use a flat-blade screwdriver to fasten the screws on the plug.
3.
Connect the other end of the DC power cord to the DC power source.
Figure 15 Connecting the DC power cord
Verifying the installation
To ensure normal operation of the L1000-A, verify the following items before you power on the
L1000-A:
•
There is enough space for heat dissipation around the L1000-A.
The grounding cable is securely connected.
•
The correct power source is used.
•
17
Advertisement
Table of Contents
Troubleshooting
