Removing The Crispers And Crisper; Cover; Adjusting The Crisper Cover Track - Whirlpool RT17DK Using Manual

Removing the crispers and crisper cover
Because your crispers are not the same size,
your crisper cover has an adjustable center
track so you can switch positions of the crisp-
ers. You can adjust the center track with the
cover in the refrigerator by removing the
crispers and the cover insert.
To remove the crispers:
1. Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Push up the cover insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1. Fit back of cover frame into notch supports
on back wall of refrigerator, then lower the
front into place.
2. Slide back of cover insert into place, then
lower the front.
Pull out to
the stop,
lift the
front and
pull egaln.
Remove the
cover insert.
Lift the cover
front, then the
back
NOTE:
If
cover insert
is glass,
handle It with
care. tt could
be heavy.
Adjusting the crisper cover track
Because your crispers are not the same
size, your crisper cover has an adjustable
center track so you can switch positions of
the crispers.
To remove
the center track:
1.
Push up the cover insert from the bottom,
then slide out with both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening in
cover.
To replace
the center track:
1. Insert rear end of track (with hole) into
opening in cover.
2. Lower front end of track into slot.
3. Make sure rear end of track has snapped
into place on under side of cover.
11