Table of Contents
Advertisement
20
Install the RF Sensor Software
The software to operate the Keysight RF Sensor is provided on the software
DVD included in the RF Sensor package. The software consists of:
SMT—the Sensor Management Tool is used to verify a sensor's status, configure
a sensor, reboot a sensor, and launch sensor programs. The SMT
communicates with a server using the Sensor Management Server
(SMS).
SMS—the Sensor Management Server handles requests from the SMT and
maintains a database entry for every sensor it manages.
SAL—the Sensor Access Library, an API is used to include sensor access calls in
user-written programs.
N6841A to KML- This tool enables porting geolocation results to a KML viewer
such as Google Earth ™.
System Planning and Optimization Tool – This tool aids in planning where to
place sensors and to predict coverage range depending on signal
power, format, antenna type, cables and preamplifier characteristics,
as well as sensor sensitivity.
The software is designed to operate on Microsoft Windows 7 and Windows 10
(both 32 and 64 bit) operating systems.
To install the RF Sensor Software, use the following steps:
1.
Place the DVD in the DVD drive of the laptop or workstation that will
control the sensor.
2.
If the PC has the autorun option enabled, the software installation
program starts automatically. If the autorun option is disabled, from
the DVD drive, run the program \winnt\setup.exe.
N6841A RF Sensor Installation Guide
Advertisement
Table of Contents
