16
4.
To add an optional GPS mast, secure the mast to the notch on the pipe
bracket using customer-supplied hose clamps. The notch fits a 26 mm
(1.05 inch) diameter pipe (3/4 inch nominal.)
threaded fitting will accommodate the threads on the base of the GPS
antenna supplied (optionally) as N6841A-GPS.
Note: The GPS mast can be attached with the pipe bracket only if the
mounting pipe is vertical. It you are mounting the Sensor to a horizontal
pipe; some other method must be used to mount the GPS mast.
A standard 26mm
N6841A RF Sensor Installation Guide