Removing The Hard Disk Drive - Clevo N150ZU Service Manual

Removing the Hard Disk Drive

The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm
(h). Follow your operating system's installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User's Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, turn it over to remove the keyboard
2. The hard disk drive will be visible at point
3. Disconnect the cable from the HDD assembly
2
a.
1
b.
(page 2 -
on the mainboard (Figure 5a
1
).
(Figure 5b
2
5) and battery (page 2 - 6).
) .

HDD System Warning
New HDD's are blank. Before you be-
gin make sure:
You have backed up any data you
want to keep from your old HDD.
You have all the CD-ROMs and FDDs
required to install your operating sys-
tem and programs.
If you have access to the internet,
download the latest application and
hardware driver updates for the oper-
ating system you plan to install. Copy
these to a removable medium.
Removing the Hard Disk Drive 2 - 9
Disassembly
Figure 5
HDD Assembly
Removal
a. Locate the HDD assem-
bly.
b. Remove the screw.

1. HDD Assembly
• 1 Screw