Portwell WUX-7300U User Manual

Nuc form factor board

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

WUX-7300U/7100U

WUX‐7300U/7100U

NUC form factor board

Version 1.0

WUX-7XXXU series User's Guide

Table of Contents

Need help?

Do you have a question about the WUX-7300U and is the answer not in the manual?

Questions and answers

Summary of Contents for Portwell WUX-7300U

Page 3: Table Of Contents
Installing the Single Board Computer ..............................25 6.3.1 Chipset Component Driver ..................................25 6.3.2 Intel® HD Graphics 620 ..................................26 6.3.3 Intel LAN I219LM Gigabit Ethernet Controller ............................26 7 BIOS Setup Items ..........................................27 Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 4 Troubleshooting ............................................. 70 8.1 Hardware Quick Installation ................................... 70 8.2 BIOS Setting ......................................71 8.3 FAQ ........................................72 9 Portwell Software Service ........................................77 10 Industry Specifications ........................................... 78 10.1 Industry Specifications ................................... 78 Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 5 Portwell provides no warranty with regard to this user’s guide or any other information contained herein and hereby expressly disclaims any implied warranties of merchantability or fitness for any particular purpose with regard to any of the foregoing. Portwell assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
Page 6 Warranty”). Portwell may in its sole discretion modify its Limited Warranty at any time and from time to time. Beginning on the date of shipment to its direct customer and continuing for the published warranty period, Portwell represents that the products are new and warrants that each product failing to function properly under normal use, due to a defect in materials or workmanship or due to non conformance to the agreed upon specifications, will be repaired or exchanged, at Portwell’s option and expense.
Page 7: Introduction
Desktop solution is still popular in the market of DVR and Factory Automation which can fulfill most of these applications; therefore, with high performance and high-end specifications, WUX-7X00U series is our first generation Kaby Lake - U chip architecture on NUC form factor board line. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 8: Specifications
1x USB 3.0 type-C port on REAR I/O ◆ Audio Interface: Mic-In / Line-Out ◆ Supports single 10/100/1000 Mbps Ethernet port (s) via PCI Express x1 bus which provides 500 MB/s ◆ Ethernet data transmission rate Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 9: Supported Operating Systems
 Windows 10 Enterprise & IOT Enterprise (64b)  Fedira 24 or later(mid -2016,64b)  Ubuntu, SuSe, Redhat Enterprise (Kernel 4.14)  Yocto v2.2 Morty(Kernel 4.8)Tool-based ; Embedded Linux Distribution  Wind River VxWorks 7(64b)  Chromium(Chrome)(64b) Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 11: Power Consumption
Power Consumption Test Configuration CPU Type Intel® Core™ i5-7300U CPU @ 2.6GHz (ES), 3M Cache SBC BIOS Portwell, Inc. WUX-7XXXU SERIES TEST BIOS 2018/10/05 Memory WARIS UB-DIMM DDR4 2133 8GB*2 (SEC K4A4G085WD) LAN Card Onboard Intel® Ethernet Connection(2) I219-LM LAN Driver Intel®...
Page 12: Environmental Specifications
System+ Device +12V 0.97A 1.81A 1.56A System+ Device +5V 1.87A USB3.0 Loading Test 4.93V/ 990 mA Environmental Specifications Storage Temperature : -20~80°C Operation Temperature : 0~60°C Storage Humidity : 5~90% Operation Humidity: 10~90% ． Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 14: Hardware Configuration
WUX-7300U/7100U 4 Hardware Configuration Jumpers and Connectors This chapter indicates jumpers’, headers’ and connectors’ locations. Users may find useful information related to hardware settings in this chapter. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 15: Jumpers Settings
The jumper settings are schematically depicted in this manual as follows: Jumper Function List 1 Clear CMOS Pad(CLRMOS1) 2 Audio Jack(AUDIO1) 3 USB3.0 Port(USB3_2) 4 USB3.0 Type‐C Port(USB3_TC_1) 5 SATA Power Output Connector(SATA_PWR1) 6 SATA3 Connector(SATA_1) 7 LPC Debug Header(LPC1) 8 Infrared LED(IR1) 9 DC‐in Jack(DC_IN1) 10 HDMI Port(HDMI_2) 11 LAN Port(LAN1) 12 Top : Display Port(HDMI_DP_1) Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 16 WUX-7300U/7100U Bottom: HDMI Port(HDMI_1) 13 USB3.0 Ports(USB3_3_4) 1: Clear CMOS Pad(CLRMOS1) 2: Audio Jack(AUDIO1) 3: USB3.0 Port(USB3_2) 4: USB3.0 Type-C Port(USB3_TC_1) 5: SATA Power Output Connector(SATA_PWR1) 6: SATA3 Connector(SATA_1) Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 17 WUX-7300U/7100U 7: LPC Debug Header(LPC1) 8: Infrared LED(IR1) 9: DC-in Jack(DC_IN1) 10: HDMI Port(HDMI_2) 11: LAN Port(LAN1) 12: Top : Display Port(HDMI_DP_1) Bottom: HDMI Port(HDMI_1) 13: USB3.0 Ports(USB3_3_4) Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 19: Signal Descriptions
ShowError(bSuccess = AsrLibWDSetConfig(WDTimer)); ShowError(bSuccess = AsrLibWDTrigger()); char Key = 0; int CurrentTime = 0; int WaitSeconds = WDTimer; while (WaitSeconds) { ShowError(CurrentTime = AsrLibWDCounter()); WaitSeconds++; while (1) while (kbhit()) Key = _getch(); Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 20 (Key == 'c') { AsrLibWDDisable(); WaitSeconds = 0; _tprintf(_T("\nWatchDog Disable")); break; if (WaitSeconds == 0) break; if (CurrentTime != AsrLibWDCounter()) { WaitSeconds--; printf("\rWatchDog timer %d, press 'r' to reset timer, 'c' to disable WatchDog.", WaitSeconds); Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 22: Gpio Signal
PinCount = 8; int n = 0; SSCORE_GPIO_VALUE Values[8]; ::AsrLibGetSioGpioGroup(GP2x, Values, &PinCount); for (n = 0; n < PinCount; n++) { DisplayGpioString(&Values[n]); _tprintf(_T("\n")); ::AsrLibSetSioGpioValue(20, ESCORE_GPIO_OUTPUT_LOW); ::AsrLibSetSioGpioValue(21, ESCORE_GPIO_INPUT); ::AsrLibSetSioGpioValue(22, ESCORE_GPIO_OUTPUT_LOW); ::AsrLibSetSioGpioValue(23, ESCORE_GPIO_INPUT); Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 23 WUX-7300U/7100U ::AsrLibSetSioGpioValue(24, ESCORE_GPIO_OUTPUT_HIGH); ::AsrLibSetSioGpioValue(25, ESCORE_GPIO_INPUT); ::AsrLibSetSioGpioValue(26, ESCORE_GPIO_OUTPUT_HIGH); ::AsrLibSetSioGpioValue(27, ESCORE_GPIO_INPUT); _tprintf(_T("New state\n")); _tprintf(_T("--------------------------------------\n")); ::AsrLibGetSioGpioGroup(GP2x, Values, &PinCount); for (n = 0; n < PinCount; n++) { DisplayGpioString(&Values[n]); Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 24: System Resources
WUX-7300U/7100U is based on Kaby Lake-U SoC family Main Memory WUX-7300U/7100U provides 2 x 260-pin So-DIMM sockets which supports DDR4 non-ECC memory. The maximum memory can be up to 32GB. Memory clock and related settings can be detected by BIOS via SPD interface.
Page 25: Installing The Single Board Computer
Chipset Component Driver WUX-7300U/7100U is based on Kaby Lake-U family. It’s a new chipset that some old operating systems might not be able to recognize. To overcome this compatibility issue, for Windows Operating Systems such as Windows 8, please install its INF before any of other Drivers are installed. You can find very easily this chipset component driver in WUX-7300U/7100U CD-title Copyright ©...
Page 26: Intel® Hd Graphics 620
Intel® HD Graphics 620 WUX-7300U/7100U has integrated Intel® HD Graphics 620 which supports DirectX 12、OpenGL 4.4. It is the most advanced design to gain an outstanding graphic performance. WUX-7300U/7100U supports DP, HDMI display output. This combination makes WUX-7300U/7100U an excellent performance hardware.
Page 27: Bios Setup Items
The BIOS setup program provides a General Help screen. The menu can be easily called up from any menu by pressing <F1>. The Help screen lists all the possible keys to use and the selections for the highlighted item. Press <Esc> to exit the Help Screen. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 29: Main
The date format is <Day>, <Month> <Date> <Year>. Use [＋] or [－] to configure system Date. System Date The time format is <Hour> <Minute> <Second>. Use [＋] or [－] to configure system Time. System Time Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 31 USB flash drive or hard drive must use FAT32/16/12 file system. If you execute Instant Flash utility, the utility will show the UEFI files and their respective information. Select the proper UEFI file to update your UEFI, and reboot your system after UEFI update process completes. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 33 Enabled / Disabled / Software Controlled Software Guard Extensions (SGX). Enabled, (SGX) Software Controlled DPTF Enable / Disable Intel Dynamic Platform Thermal Framework. ★Enabled, Disabled Intel SpeedStep Technology Allows more than two frequency ranges to be supported. ★ Enabled, Disabled Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 34 Enable / Disable Intel Speed Shift Technology support. Enabling will expose the CPPC v2 Intel Speed Shift Technology Disabled, Enabled ★ interface to allow for hardware controlled P-states. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 36 By enabling Good Night LED, the Power LED will be switched off ★Auto, Enabled, Disabled Good Night LED when the system is on. It will also automatically switch off the Power and Keyboard LEDs when the system enters into Standby/Hibernation mode. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 38 S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting ★Enabled, Disabled Hard Disk S.M.A.R.T. Technology. It is a monitoring system for computer hard disk drives to detect and report on various indicators of reliability. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 40 SATA2. Hot Plug Enable or disable Hot Plug for this port. ★Disabled, Enabled ★Hard Disk Drive SATA Device Type Select device type according to your connected device. Solid State Drive Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 42 Configure Remote Assistance Process parameters. ASF Configuration Configure Alert Standard Format parameters. Secure Erase Configuration Secure Erase configuration menu. OEM Flags Settings Configure OEM Flags. MEBx Resolution Settings Resolution settings for MEBx display modes. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 44 WUX-7300U/7100U Feature Description Options Trigger CIRA boot ★Disabled, Enabled Activate Remote Assistance Process Note: Network Access must be activated first from MEBx Setup. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 46 WUX-7300U/7100U Feature Description Options ★Enabled, Disabled PET Progress Enable / Disable PET Events Progress to receive PET Events. ★Disabled, Enabled WatchDog Enable / Disable WatchDog Timer. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 48 Options Change Secure Erase module behavior ★Simulated, Real Secure Erase mode Simulated: Performs SE flow without erasing SSD Real: Erase SSD ★Disabled, Enabled Force Secure Erase Force Secure Erase on next boot. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 50 Hide Unconfigure ME confirmation prompt when attempting ME unconfiguration. OEMFlag Bit 14: ★Disabled, Enabled MEBx OEM Debug Menu Enable Enable OEM debug menu in MEBx. OEMFlag Bit 15: ★Disabled, Enabled Unconfigure ME Unconfigure ME with resetting MEBx password to default. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 52 ★Auto, 80x25, 100x31 Non-UI Mode Resolution Resolution for non-UI text mode. ★Auto, 80x25, 100x31 UI Mode Resolution Resolution for UI text mode. ★Auto, 640x480, 800x600 Graphics Mode Resolution Resolution for graphics mode. 1024x768 Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 53 WUX-7300U/7100U Super IO Configuration Configure Super IO Parameters Feature Description Options ★Enabled, Disabled CIR Controller Enable or Disable CIR Controller Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 55 USB Keyboard/Remote Power On Allow the system to be waked up by an USB keyboard or remote controller. ★Disabled, Enabled USB Mouse Power On Allow the system to be waked up by an USB mouse. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 57 Third Party USB3.1 Controller Enable or Disable all the Third Party USB3.1 ports. This is a workaround for 0Ses without XHCI ownership change should be claimed by ★Disabled, Enabled XHCI Hand-off XHCI driver. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 59 Feature Description Options Enables or Disables BIOS support for security device. O.S. will not show Security ★Enabled, Disabled Security Device Support Device. TCG EFI protocol and INT1A interface will not be available. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 62: Security
WUX-7300U/7100U 7.2.4 Security This section lets you set security passwords to control access to the system at boot time and/or when entering the BIOS setup program. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 63 Enable to support Windows 8 or later versions Secure Boot. Enabled / Disabled Intel PTT function. ★Disabled, Enabled Intel(R) Platform Trust Technology Enabled: Enable Intel PTT in ME Disabled: Disable Intel PTT in ME, Use discrete TPM Module. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 64: Boot
WUX-7300U/7100U 7.2.5 Boot In this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 65 Enable to display the boot logo or disable to show normal POST message. ★Enabled, Disabled AddOn ROM Display Set display mode for Option ROM. CSM(Compatibility Support Module) OpROM execution, boot options filter, etc. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 67 Launch Video OpROM Policy Legacy only to run those that support legacy option ROM only. Select Do UEFI only not launch to not execute both legacy and UEFI option ROM. Do not launch Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 69 Load UEFI Default values for all the setup questions. Load UEFI Defaults F9 key can be used for this operation. Attempts to Launch EFI Shell application (Shell.efi) from one of the available Launch EFI Shell from filesystem device filesystem devices. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 70: Troubleshooting
ATX Power Setting Unlike other Single board computer, WUX-7300U/7100U supports ATX only. Therefore, there is no other setting that needs to be set up. However, there are only one DC jack that must be connected on the WUX-7300U/7100U board. WUX-7300U/7100U requires a 19V / 12V 96W DC adaptor.
Page 71: Bios Setting
To make sure that you have a successful start with WUX-7300U/7100U, it is recommended, when going with the boot-up sequence, to hit “delete ” or ”F2” key and enter the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up your system far well.
Page 72: Faq
BIOS setting back to the initial factory configurations. It is recommended to do this so you can be sure the system is running with the BIOS setting that Portwell has highly endorsed. As a matter of fact, users can load the default BIOS setting at any time when system appears to be unstable in boot up sequence.
Page 73 WUX-7300U/7100U Question: How to update the BIOS file of WUX-7300U/7100U? Answer: 1. Please visit web site of Portwell download center as below hyperlink http://www.portwell.com.tw/support/download_center.php Registering an account in advance is a must. (The E-Mail box should be an existing Company email address that you check regularly.) http://www.portwell.com.tw/member/newmember.php...
Page 75 WUX-7300U/7100U 7. When you see the “Programming success” message, which means the BIOS update processes finished. Please cut the AC power off wait for 10 seconds before powering on. Copyright © Portwell 2018 WUX-7XXXU series User's Guide...
Page 76 WUX-7300U/7100U Question: What are the display options while using WUX-7300U/7100U board? Answer: -The Motherboard supports two HDMI ports on rear I/O -The Motherboard supports one DP port on rear I/O Note: Please visit our Download Center to get the Catalog, User manual, BIOS, and driver files.
Page 77: Portwell Software Service
WUX-7300U/7100U 9 Portwell Software Service 1. If you have customized requirements of BIOS, you can contact person of our company or branch. 2. If you have requirements of WDT、GPIO APP, you can contact our headquarter or branch, and we can render you assistance on developing.
Page 78: 10 Industry Specifications
WUX-7300U/7100U 10 Industry Specifications 10.1 Industry Specifications The list below provides links to industry specifications that apply to Portwell modules. Low Pin Count Interface Specification, Revision 1.0 (LPC) http://www.intel.com/design/chipsets/industry/lpc.htm Universal Serial Bus (USB) Specification, Revision 2.0 http://www.usb.org/home PCI Specification, Revision 2.3 https://www.pcisig.com/specifications...

This manual is also suitable for:

Wux-7100u

Portwell WUX-7300U User Manual

1 Introduction

2 Specifications

3 Block Diagram

4 Hardware Configuration

5 Signal Descriptions

6 System Resources

7 BIOS Setup Items

8 Troubleshooting

9 Portwell Software Service

10 Industry Specifications

Quick Links

Need help?

Questions and answers

Related Manuals for Portwell WUX-7300U

Summary of Contents for Portwell WUX-7300U

This manual is also suitable for:

Table of Contents