Code Soft TP-290XIII Programmer's Manual page 9

10、ESC 2 Select default line spacing
[Format] ASCII
Hex
Decimal
[Description] Selects default (3.75mm, 1/6-inch) line spacing.
[Notes]
§
[Reference] ESC 3
11、ESC 3 n Set line spacing
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Description] Sets the line spacing to [ n (1/192)] inches.
[Notes]
§
[Default] n = 3.75mm
[Reference] ESC 2, GS P
12、ESC ? n Cancel user-defined characters
[Format] ASCII
Hex
Decimal
32 ≤n ≤127
[Range]
[Description] Cancel user-defined characters
[Notes]
§
§
[Reference] ESC &, ESC %
13、ESC @ Initialize printer
[Format] ASCII
Hex
Decimal
[Description] Clears the data in the print buffer and resets the printer mode to the mode that is
in effect when the power is turned on.
ESC 2
1B 32
27 50
Default line spacing is absolute in standard mode and page mode.
ESC 3
1B 33 n
27 51 n
Line spacing is absolute in standard mode and page mode.
ESC ?
1B 3F n
27 63 n
This command cancels the pattern defined for the character code specified
by n. After the user-defined characters are canceled, the corresponding
pattern of the internal character is printed.
If a user-defined character has not been defined for the specified character
code, the printer ignores this command.
ESC @
1B 40
27 64
THERMAL RECEIPT PRINTER
n
n
8