Code Soft TP-290XIII Programmer's Manual page 4

5、ESC $ nL nH
[Format] ASCII
Hex
Decimal
0 ≤ n ≤ 255
[Range]
[Description]
§
§
§
6、ESC % n Select/cancel user-defined character set
[Format] ASCII
Hex
Decimal 27
0 ≤ nL ≤ 255
[Range]
[Description] Selects or cancels the user-defined character set.
§
§
[Details]
§
§
[Default] n = 0
[Reference] ESC &，ESC ?
7、ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
[Format] ASCII
Hex
Decimal
[Range] y = 3
32 ≤ c1 ≤ c2 ≤ 127
0 ≤ x ≤ 12 Font A (12 × 24)
0 ≤ x ≤ 9 Font B (9 × 17)
0 ≤ d1 ... d(y × xk) ≤ 255
[Description] Defines user-defined characters.
§
§
Set absolute print position
ESC $ nL nH
1B 24 nL nH
27 36 nL nH
Sets the distance from the beginning of the line to the position at which
subsequent characters are to be printed.
The distance from the beginning of the line to the print position is [( nL + nH x
256) x (vertical or horizontal motion unit)] inches.
Settings outside the specified printable area are ignored.
ESC % n
1B 25 n
37 n
When the LSB of n is 0, the user-defined character set is canceled.
When the LSB of n is 1, the user-defined character set is selected.
When the user-defined character set is canceled, the internal character set is
automatically selected.
n is available only for the least significant bit.
ESC &
26 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
1B
38 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
27
y specifies the number of bytes in the vertical direction.
c1 specifies the beginning character code for the definition, and c2 specifies
THERMAL RECEIPT PRINTER
Define user-defined characters
y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
3