Code Soft TP-290XIII Programmer's Manual page 2

Manual Description
Command Notation
[Name] Command in ASCII format and general description.
[Format] The code sequence, including ASCII, HEX and DECIMAL.
[Range] Gives the allowable ranges for the arguments.
[Description] Describes the command's function.
[Details] Describes the usage of the command in detail.
[Notes] Provides important information on setting and using the printer command.
[Reference] Lists related commands.
[Example] Gives examples of how to use the command.
1、HT Horizontal tab
[Format] ASCII
Hex
Decimal
[Description] Moves the print position to the next horizontal tab position.
[Details]
§
§
§
§
§
§
[Reference] ESC D
2、LF Print and line feed
[Format] ASCII
Hex
Decimal
[Description] Prints the data in the print buffer and feeds one line based on the current line spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference] ESC 2, ESC 3
HT
09
9
This command is ignored unless the next horizontal tab position has been set.
If the next horizontal tab position exceeds the printing area, the printer sets the
printing position to [Printing area width + 1].
Horizontal tab positions are set with ESC D.
If this command is received when the printing position is at [printing area
width + 1], the printer executes print buffer-full printing of the current line and
horizontal tab processing from the beginning of the next line.
The default setting of the horizontal tab position for the paper roll is font A (12
╳ 24) every 8 character (column 9, 17, 25, ...).
When the buffer is full on current line, the printer will do the following:
In Standard Mode, print the current line and set the print position to next line.
In Page Mode, printer enters new line and set the print position to next line.
LF
0A
10
THERMAL RECEIPT PRINTER