Code Soft TP-290XIII Programmer's Manual page 8

D d 1 d4 d 7
d 2 d5 d8
d 3 d6 d9
打 印 数据
9、ESC – n
Turn underline mode on/off
[Format] ASCII
Hex
Decimal
0 ≤ n ≤2, 48 ≤n ≤ 50
[Range]
[Description] Turns underline mode on or off,
n
0, 48
1, 49
2, 50
[Notes]
§
§
§
§
§
§
[Default] n = 0
[Reference] ESC !
D d 1 d 2 d 3 d 4 d 5 d 6 d 7 d 8 d 9
最 高 位
位图 数 据
最低 位
ESC -
1B 2D
27 45
Function
underline mode is turned off.
underline mode is turned on. (1dots)
underline mode is turned on. (2 dots )
Underlines can be printed for all characters, but not for the space set by HT.
Underline is not enabled when 90° rotation or character contrary is set.
When underline mode is turned off, the following characters are without
underline. The underline width is not changed. Default width is 1 dot width.
Underline mode is still enabled even character size is changed.
Underline mode can also be turned on or off by using ESC !.
This command does not affect the setting of Kanji characters.
THERMAL RECEIPT PRINTER
位 图数 据
打 印 数据
1点
单 密 度
双 密度
n
n
n
7