Code Soft TP-290XIII Programmer's Manual page 21

§
Y y 8 × 点
[Reference] GS /
32、GS / m Print downloaded bit image
[Format] ASCII
Hex
Decimal
0 ≤ m ≤ 3, 48 ≤ m ≤ 51
[Range]
[Description] Prints a downloaded bit image using the mode specified by m.
m selects a mode from the table below:
m Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
[Notes]
§
§
§
§
GS * ，GS *
[Reference]
④ Printer is reset or the power is turned off.
The following figure shows the relationship between the downloaded bit image
and the printed data.
X x 8
D1 d1
d y+1
d y+ 3 --- ---- --- --- - -- --- - d 70
- - -- - - -- --- --- --- - -- - - d 71
d2
dy
d y + 2 - -- -- - -- -- -- --- --- -- -
GS /
1D 2F
29 47
Vertical Dot Density (DPI)
200
200
100
100
This command is ignored if a downloaded bit image has not been defined.
In standard mode, this command is effective only when there is no data in the
print buffer.
This command has no effect in the print modes (emphasized, double-strike,
underline, character size, or white/black reverse printing), except for up side
down printing mode.
If the downloaded bit-image to be printed exceeds the printable area, the
excess data is not printed.
THERMAL RECEIPT PRINTER
× 点
m
m
m
Horizontal Dot Density (DPI)
200
100
200
100
最 高位
最 低位
d x y 8 × ×
20