Code Soft TP-290XIII Programmer's Manual page 16

§
§
[Notes]
§
§
§
[Default] n = 0
[Example]
A B C D E F
0 1 2 3 4 5
28、FS p n m Print NV bitmap image
[Format] ASCII
Hex
Decimal
1 ≤ n ≤ 255
[Range]
[Description] m specifies the print mode:
m
0, 48
1, 49
2, 50
3, 51
§
§
[Details]
§
§
§
§
§
When the LSB of n is 0, upside-down printing mode is turned off.
When the LSB of n is 1, upside-down printing mode is turned on.
Only the lowest bit of n is effective.
This command is enabled only when input at the beginning of a line.
In upside-down printing mode, the printer rotates the line to be printed by
180° and then prints it.
进 纸方 向
FS p
1C 70
28 112
0 ≤ m ≤ 3 , 48 ≤ m ≤51
Mode Vertical Density (DPI)
Normal 200
Double-width 200
Double-height 100
Quadruple 100
n is the number of the NV bitmap image (defined using the FS q command).
m specifies the bit image mode.
NV bitmap image means a bitmap image, which is defined in a non-volatile
memory by FS q and printed by FS p.
This command is not effective when the specified NV bit image has not been
defined.
In standard mode, this command is effective only when there is no data in
the print buffer.
In page mode, this command is not effective.
This command is not affected by print modes (emphasized, double-strike,
underline,character size, white/black reverse printing, or 90° rotated
THERMAL RECEIPT PRINTER
n m
n m
n m
Horizontal Density (DPI)
200
100
200
100
15