Adjusting The Refrigerator Shelves; Moving The Meat Pan; Changing The Light Bulb - Whirlpool ET1NK Use & Care Manual

No-frost refrigerator-freezer
Table of Contents

Advertisement

Adjusting
the refrigerator
shelves...
I, F trst, remove food from shelf
2 Slide shelf strarght out to stop
3 Lift front
4.
Slrde the rest of the way out
Replacing
Shelf:
1 Frt back of shelf on top of gurdes wrth wire stops
on the bottom
of gurdes.
2 Lrft front, slide shelf In until rt clears g&e
stops
Moving
the meat pan
and cover...
The meat
pan and cover
can be removed
for
cleanrng
and moved
to another
shelf, If desred
Remove the meat pan first
Removing:
I Slide the pan out to stop.
2. Lift the front of meat pan.
3. Slide pan the rest of the way out
4. Tilt cover up at front.
5. Pull forward
and out
Replacing:
1 Fit notches underneath
cover over rear and center
cross bars on shelf
2.
Lower cover In place.
3. Replace
meat pan rn reverse order
Removing
crispers
and
crisper cover.. .
Removing
the Crispers:
Lift
the Front, Then the Back.
1 Slide crrsper strargnf out to stop, lift front, then side
the rest of the way out
2 Replace
rn the reverse order
Removing
Cover:
1 Loft front and remove the cover support
2 Loft out cover by pullrng up and out
Replacing
Cover:
1 Fit bock of cover Into notch supports on
walk
of
refrrgerator, then lower front Into place
2 Replace
cover support with the long tab towards
the front Note: If support needs adjustment.
turn
base right to lower, or left to rorse
Pull out to stop.
e Front and Pull Again.
Changing
the light bulb...
WARNING:
Before removing
the light bulb, either
unplug
the refrigerator
or disconnect
the electricity
leading
to the re-
frigerator
at the main power
supply.
Shock
and injury
can occur
if elec-
tricity
remains
connected.
1 Reach behInd control console to find bcllb
2 Remove bulb
3 Replace
with a 0watt
opp:jance
bcllb
Removing
and adjusting
the freezer shelf...
To remove
shelf:
1 Lift front slrghtly
2. Loft back off supports
3 Replace
In reverse order
70 adjust
shelf:
1 Remove sheif
2 Remove supports by sltdrng upwards
3 Replace
supports on desired level
4
Replace
shelf
b

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et18nk

Table of Contents