Table of Contents
Advertisement
GC Best Boy Remote Followspot Luminaire
SOURCE:
Osram SHARXS HTI 1500W/D7/60 lamp
OUTPUT:
20,000 lumens
INPUT CURRENT:
Minimum 200V, Maximum 270V.
0.5 Amps at 208V, 8.75 Amps at 240V
Auto-sensing voltage input range 170V to 270V
REFLECTOR:
Precision glass reflector with cold mirror coating.
ZOOM RANGE:
8:1 from a tight spot of 8° to a very wide flood of 64° maintaining focus throughout.
BEAM SIZE CONTROL: In addition to the zoom optics, a mechanical iris provides continuous beam size control for both rapid
changes and smooth, timed beam angle changes.
FRAMING:
Four-blade framing system featuring four independent blades mounted in two planes. Each blade can be
tilted +/- 30° and the entire frame system can be rotated +/- 60° for a total travel of 120°.
DIMMING:
Gray-scale glass dimmer for full-field dimming from 0% to 100% with accurate slow-speed control and
fast bumps.
STROBE:
Servo-powered, lightning fast strobe wheel.
EFFECTS:
One (1) multiplying four-facet prism, two (2) glass effects, and variable frost.
COLOR:
CMY color system featuring three (3) crossfading color wheels of Cyan, Magenta, and Yellow, plus one (1)
designer wheel with seven (7) user-changeable color filters.
COLOR TEMP CONTROL: Adjustable color temperature wheel, range from 3,000K all the way up to 7,500K. Includes an integrated
minus green filter.
ROTATING GOBOS:
Two (2) indexable, rotating gobo wheels with six (6) gobos per wheel. Gobos are individually calibrated so
the unit will automatically index the orientation of each gobo regardless of initial placement. Both gobo
wheels accept PRG Moiré Gobos™ for advanced gobo rotator effects.
OPERATING TEMP:
0° to 120°F (18° to 49°C)
CONTROL:
Compatible with all PRG consoles and a wide variety of DMX512, Art-Net, and sACN consoles.
DMX CHANNELS:
45 DMX512 channels required per unit. (36 DMX512 channels with Framing disabled.)
ETHERNET BYPASS:
A relay allows Ethernet signals to pass through daisy-chained luminaires even if power is removed.
ON-BOARD CONTROL: Built-in LCD touchscreen display allows for on-board fixture control and feedback. On-board battery
power allows for the fixture address and configurations to be set without having to apply AC power to the
luminaire.
PAN & TILT:
Three-phase, high-speed servomotors. Brakes are applied when off.
RANGE:
Pan - 615°, Tilt - 260°
CAMERA:
On-board, HD-SDI camera featuring optical zoom, targeting reticle, night-vision mode, and video output
of 1920 x1080 pixels.
POSITIONING:
Can be mounted in any orientation.
SPACING:
Hangs on 28 inch (711 mm) centers.
WEIGHT:
109 lbs (49.44 kg) without hooks.
GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
68
Advertisement
Table of Contents
