Installation; Fixture; Truss Box - PRG GroundControl Remote Followspot System User Manual

Table of Contents

Advertisement

INSTALLATION

Fixture

Mount or position the GC luminaire as required. Refer to the appropriate Bad Boy or Best Boy luminaire user manual
for detailed installation instructions.

Truss Box

The GC Truss Box can be hung horizontally or vertically from any 2-inch diameter truss. Two Mega-Coupler hooks are
provided for this purpose.
WARNING: A safety cable should be used in all mounting configurations.
WARNING: Un câble de sécurité doit être utilisé dans toutes les configurations de montage.
CAUTION: The Truss Box should be powered from an independent circuit separate from the fixture.
CAUTION: La Truss Box devrait être alimenté par un circuit indépendant séparé de l'appareil .
Step 1. Mount Truss Box to pipe using Truss Hooks (Figure 12). Tighten wing nuts to secure in place.
Step 2. Attach safety cable and loop around pipe as shown.
NOTE: Mega-Coupler Truss Hook is designed
to be used only with 2.0" OD round tubing.
GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
12
Wing Nut
Mega-Coupler Hook (2)
Safety Cable
Figure 12: Hanging the Truss Box
Pipe
Truss Box

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc rfs

Table of Contents