Table of Contents
Advertisement
Manual Control
The Control Arm of the GC Followspot Controller provides handles, knobs, faders, and buttons for manual control of
the associated fixture.
Pan and Tilt
The Control Arm can be swiveled up/down and right/left using the two followspot handles. As the unit is turned, the
associated fixture will pan and tilt accordingly. The corresponding camera view from the fixture will be displayed in the
monitor.
Note: The fixture camera view can be flipped using the Settings menu. Refer to
"Settings Menu"
on page 24.
View from Luminaire Camera
Control Arm
Handle
Handle
Figure 22: Pan/Tilt Control
Note: If incoming comm is removed when pan/tilt are under console control, pan/tilt control will be regained at the
control arm.
GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
29
Advertisement
Table of Contents
