Table of Contents
Advertisement
Day/Night Modes
The Night mode feature allows a performer to be seen on a virtually black stage.
Day / Night modes can be toggled using the DAY/NIGHT button on the Control Arm (Figure 24). The button's LED will
be lit when the Controller is in Night mode. While in Night mode, the camera and the image displayed will be in high
contract black and white.
Note: Add an IR Illuminator(s) if a total blackout is expected. This will aid in viewing the performers in extremely low or
no light situations.
Reticle
The Reticle feature adds targeting crosshairs to the camera view.
Reticle can be toggled on and off using the RETICLE button on the Control Arm (Figure 24). The button's LED will be
lit when Reticle is turned on.
The position and size of the reticle can be configured using the Settings menu. (Refer to
Blackout
The Blackout feature sets the intensity level to zero (no output). Blackout can be turned on by pressing the
BLACKOUT button on the Control Arm (Figure 24). The button's LED will be lit when Blackout is active.
The Blackout button can be enabled/disabled in the Options software menu. (Refer to
Camera Iris
The camera's iris can be adjusted using the CAMERA IRIS knob on the Control Arm (Figure 24).
Presets
A bank of eight Preset buttons available on the Control Arm allows for quick recall of stored presets (i.e., looks). Press
the appropriate button to store or recall a preset (Figure 25). Refer to
information on the Preset function.
The Preset button's LED will be lit when the preset is recalled.
"Store Preset Menu"
PRESET BUTTONS (1-8)
Figure 25: Preset Buttons
GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
"Settings Menu"
on page 24.)
"Options Menu"
on page 23.)
on page 26 for more
31
Advertisement
Table of Contents
