Configuration Menu; Lamp Menu; Communication Menu - PRG GroundControl Remote Followspot System User Manual

Configuration Menu

+
DMX Address - displays current DMX512 address. Press to
bring up numeric keypad for inputting the address.
+
Lamp - press panel to open
+
Comm - displays currently active input protocol. Press to open
Communication Menu.
+ Status/Info - displays Truss Box status: OK (green) or XXX (red).
Press to open Status Menu.
+
Settings - displays current pan/tilt options. Press to open
Settings Menu.
+
Presets - displays last recalled preset (green) and stored
presets (white) in a grid. (There are 8 possible presets.) Press to open
+
Options - displays current intensity scaling, blackout, fader assignments, and zoom table settings. Press to open
Options Menu.
Press (X) to return to Main

Lamp Menu

+
Start/Douse - provides options to start or douse the lamp.
+
Power On - sets option to start lamp automatically upon power
up. Press to bring up wait/start options.
+
Lamp Limit - sets lamp wattage limit. Press to bring up Low/
Medium/High options.
+
Lamp Status - displays total lamp hours and current lamp state.
Press (X) to return to Main

Communication Menu

+
Control In - displays current DMX512 control values coming
from the console (if connected). If incoming DMX is absent, "no
comm" will be displayed.
+
Control Out - displays current DMX512 control values being
sent to the fixture.
Values will be displayed in yellow text when being controlled by a
knob or fader, and blue text when being controlled by the control
arm's pan/tilt action.
Press (X) to return to Main
GROUNDCONTROL™ REMOTE FOLLOWSPOT SYSTEM™ USER MANUAL
22
Lamp Menu.
Menu.
Menu.
Menu.
Presets Menu.