Table of Contents
Advertisement
Plant operation = Off
Action
Return to main menu
Action
Plant stopping
Action
Action
Communication
Action
Building Technologies
HVAC Products
Plant operation
Preselection:
State:
Cause:
Plant op. selector
Select "Off" on the "Preselection" line and confirm by pressing the OK knob.
Press ESC to return to the "Main menu" page.
Main menu
Commissioning...
Time switch...
Room operating mode...
Plant operation...
Select "Commissioning" and press the knob.
Before the "Commissioning" page is displayed, the following warning appears:
Caution!
Plant stops
ESC
Confirm the display of
"Commissioning" page now appears.
Commissioning
Basic configuration...
Extra configuration...
Settings...
Communication...
Select the "Communication" line for example, by rotating the knob, and then press
the knob to open the "Communication" page.
Main menu > Commissioning > Communication
Communication
Basic settings...
Room...
Holidays//Special days...
Distribution zones...
Press the knob for access to the "Basic settings" page
Basic documentation: Communication via the KNX bus
Commissioning notes
Off
Off
OK
OK
by pressing the knob (this causes the plant to stop). The
27/120
CE1P3127en
30.08.2007
Hide quick links:
Advertisement
Table of Contents
