Evc; Hydraulic Box - Hardi Ranger 550 Instruction Book

8 - Technical specifications

EVC

When connecting an optional function, be aware that maximum current for every connector is 2 Amp.
Total current for the whole connector box may not exceed 10 Amp.

Hydraulic box

Option H +
Option H -
Option I +
Option I -
ATTENTION: The "Fold inner" function printed on the circuit board is used for the "Boom Lift" function of the HV/HZ
hydraulic circuits.
ATTENTION: The "Lock" function printed on the circuit board is used for the "Hy Bypass" function of the HV/HZ
hydraulic circuits.
ATTENTION: The functions shown above in italics (i.e. "Boom Up") are not printed on the circuit board, but are shown
for identification purposes.
8.6
In + Up +
Up -
In -
Out + Down +
Down -
Out -
up down
Boom Lift
Up + Boom Dn +
Up - Boom Dn -
Down + Boom Up +
Down - Boom Up -
Hy Bypass +
Hy Bypass -
Out +
Flow rev +
Out -
Flow rev -
In +
Flow fwd +
In -
Flow fwd -