Remote Control; Cleaning And Maintenance - Eberg BRIS Instruction Manual

Remote Control

Remote control operations are identical to the functions on the control panel
• The remote control receiving distance should be 5 meters, the center angle is 30 degrees -45
degrees
• If the remote control is still in close proximity to the machine and still cannot be controlled,
replace the remote control battery please.
• Do not let children use the remote control as toys.

Cleaning and Maintenance

Please dial out the power cord first
The cleaning method is as follows
The body can be cleaned with a cleaning fluid and a soft cloth. Do not use corrosive cleaners,
gasoline, alcohol, etc. to clean the plastic parts to prevent deformation or damage.
Clean the rear guard
Remove the back-shell filter and clean it with a brush.
www.eberg.eu
Clean the water tank
Pull out the water tank, then use a
brush to clean the tank, rinse it with
clean water, dry it, and put it back in the
unit.
16
BRIS EN