Remote Control - Eberg FANTO 120 Instruction Manual

EN FANTO 120

REMOTE CONTROL

Turn ON / OFF button
Turn off screen button
Oscillation function
button
BATTERY REPLACEMENT IN REMOTE CONTROL
To replace the battery in the remote control, slide out the guide of the battery, remove the old
battery, then insert the new battery in the same place and slide the guide until the latch clicks.
One battery is needed to power the remote control, model No. CR2025 (3V). We recommend
using a lithium battery for extended use.
When the battery runs out, follow the disposal instructions on the battery pack.
ON/OFF
TURN OFF SCREEN SPEED
SWING ION TIMER
OPEN
PUSH
13
Fan speed selection button
TIMER mode button
Ionizer function button
www.eberg.eu