Removing The Freezer Shelves; Removing The Freezer Bin; Ice Cube Trays; Changing The Light Bulbs - Whirlpool ED19HK Use & Care Manual

Removing the freezer shelves...
Lilt the Front
Then the Back
Removing freezer bin.. .
For proper air movement, keep the freezer brn in
place when the refrigerator is operating.
To remove the bln:
l
Slide out to the stop.
l
Lift the front to clear the stop.
l
Slide out the rest of the way.
To replace the bln:
l
Place bin on the slides.
l
Make sure the stops clear
the front of the slides.
l
Slide bin in.
Ice cube trays...
To remove ice:
1. Hold troy at both ends.
2. Slightly twist.
Changing the light bulbs.. .
WARNING: Before removing the light bulb, either
unplug the refrigerator or disconnect
the electricity leading to the re-
frigerator at the main power supply.
Shock and injury can occur if elec-
tricity remains connected.
Removing the base grille. . .
1. Open the doors
I. Lift front slightly.
2
Loft bock off supports.
3. Replace In reverse order
If cubes ore not used, they may shrrnk The movrng
cold arr starts a slow evaporatron The longer cubes
are stored, the smaller they get
2 Pull grille outwards as shown
3
Do not remove Tech sheet
fastened behind grille
light blubs behind refrigerator and freezer
control consoles:
1 Pull control knob straight off
2. Pull bottom of control panel straight out.
3.
Lift top of panel off supports.
4. Replace with a 40-w&t applrance bulb
5. Replace panel In reverse order,
Pull Off the Dial,
Pull Out at the Bottom
To replace:
I. Line up grille support tabs wrth metal
claps
2 Push firmly to snap into place
3
Close the doors