Exterior Moisture Control; Adjusting The Refrigerator Shelves; Removing The Freezer Shelves; Removing The Freezer Door Shelves - Whirlpool ED22ZR Use & Care Manual

Using Your Refrigerator
Conttnued
Exterior moisture control
The Exterior Moisture Control on the Control
Console operates electric heaters around the
door openings. These heaters help keep
moisture from forming on the outside of the
refrigerator.
1. Use the OFF setting when humidity is low.
2. Use the ON setting if moisture forms on the
outside of the refrigerator.
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator.
To remove wire shelves:
1. Remove items from shelf.
2. Tilt up at front.
3. Lift up at back.
4. Pull shelf straight out.
To replace wire shelves:
1. Guide the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
Removing the freezer shelves
To remove the shelves:
1. Lift right side of shelf off
supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.
Removing the freezer door shelves
Shelves can be removed for easier cleaning
To remove door shelves:
1. Grasp shelf at both ends.
2. Lift up and pull out.
To replace door shelves:
1. Insert hooks into guides on both sides.
2. Push down to lock in place.