Removing The Freezer Shelves; Removing The Freezer Bin; Changing The Light Bulbs; Removing The Base Grille - Whirlpool ED19HK Use & Care Manual

No-frost no-frost refrigerator-freezer
Hide thumbs Also See for ED19HK:
Table of Contents

Advertisement

Removing
freezer shelves.. .
1 i~ft front slightly
2 Ltft back off supporTs
2 ?eplace
in reverse order
Lift the Front
Then the Back
Removing
freezer bin.. .
For proper
arr movement,
keep the freezer bn or.
blace when the refrigerator
IS operating
To remove
the bln:
l
Slide out to the stop
l
Lift the front to clear the stop
l
Slide out the rest of the way
To replace
the bln:
l
Place brn on the slrdes
l
Make
sure the stops clear
the front of the slrdes.
l
Slrde bin In.
Changing
the light bulbs.. .
WARNING:
Before
removing
a light bulb,
either
unplug
the refrigerator
or disconnect
the electricity
leading
to the
re-
frigerator
at the main power
supply.
Shock
and injury
can occur
if elec-
tricity
remains
connected.
light
bulbs behind
refrigerator
and freezer
con
trol consoles:
7 Pull control knob straight off
L Pull bottom of control panel straight out
S Loft top of panel off supports
4 Replace
with a 40-w&t
appliance
bulb
5 Replace
panel In reverse order
Pull Off the Dial;
-
Pull Out at the Bottom
Removing
the base
grille...
1 Open the doors
To replace:
Support
Tabs
Z Pull grrlle outwards as shown
3 Do not remove
Tech sheet fastened beWo
gril'e
'
Ice cube trays.. .
Line up grrlle support tabs wrth metal clips
Push firmly to snap Into place
Close the doors
cubes are not used the\ may sr'rlnk 7rle mcvlng
I ;,d afr starts a slow evaporatior7
The clrger cubes
r.r-: stored the smaller *hei get
To remove
ice:
1 Hold tray at both ends
2 Slightly twist

Advertisement

Table of Contents
loading

Table of Contents