Kts Truck; Diagnosis Panel; Connection Panel; Led A And Led B Status Display - Bosch KTS Truck Original Instructions Manual

�.5 K�S �ruck
�.5.1

Diagnosis panel

DIAG
Fig. 1: Diagnosis panel
1 OBD diagnostic cable connection (DIAG)
�.5.2

Connection panel

12/24 V DC
1
Fig. 2: Connection panel
1 Connection for adapter cable with battery clips or connecting
cable for cigarette lighter socket
2 LED A and LED B (refer to Section 3.5.3)
3 USB connection
Robert Bosch GmbH
459899-01_Ko
1
USB
A B
459899-02_Ko
2 3
Description of unit | K�S �ruck | 21
�.5.�

LED A and LED B status display

Status LED A
KTS Truck ready Off
for operation
Data communica- Flashing green
tion with control (irregular)
unit
Firmware update Off
in progress
LED A Function
Off No data communica-
tion with control unit
Flashing green Data communication
(irregular) with control unit
Green light Hardware/firmware
problem
Red light Power supply > 35 V
LED B Function
Off No power supply
Flashing green KTS Truck ready for
operation
(1-second fre-
quency)
Green light Hardware/firmware
problem
Flashing yellow Overvoltage at
(1-second fre- diagnostic cable
quency)
Yellow light Hardware/firmware
problem
Flashing red Firmware update
(irregular) in progress
Red light Firmware update
problem
Unplug USB connection and power supply and plug in again.
*)
Contact customer service if the problem persists.
en
LED B
Flashing green
(1-second
frequency)
Flashing green
(1-second
frequency)
Flashing red
(irregular)
Action
Check connection
to control unit
None
*)
Check voltage
in vehicle
Action
Check power
supply
None
*)
*)
*)
None
Repeat firmware
update
|
1 689 989 100 2011-11-18