Table of Contents

Advertisement

Troubleshooting

If any of the following symptoms are in evidence, proceed as follows:
Symptom
The odors are not
eliminated.
The purifi ed water fl ow is
low.
The purifi ed water looks white
and cloudy or it glitters.
The source water does not
fl ow properly.
The shower does not come
out uniformly.
Suspended particles are
mixed in with the purifi ed
water.
Water is leaking from the
unpurifi ed water shower
holes when the product is
used with the selector lever
at the purifi ed water setting.
Water is leaking from the
unpurifi ed water shower
holes when the product is
used with the selector lever
at the source water straight
setting.
Hot water is discharged
from the hot water outlet
(and sounds may also be
heard as well).
Air bubbles or droplets
of water can be seen in
the window area of the
cartridge life indicator.
Suspected cause
● Has the replacement
timing of the cartridge
already passed?
● The usage period differs
depending on the content
of the organic substances
contained in the water and
the extent to which the
water is cloudy.
Is the filter clogged with
foreign matter?
Is the purified water outlet
dirty?
Has the selector lever been
set to a position which is not
a marked position?
Is hot water passing through
the product?
Water flows inside the cartridge life indicator. This is why air
bubbles or droplets of water may be visible from the window.
This is normal and not an indication that something is wrong
with the product. (See page 16)
Remedial action
(reference page)
Replace the cartridge.
(See page 18)
Clean the filter.
(See page 19)
Clean the purified water
outlet. (See page 19)
Refer to page 15, and set
the lever to the specified
position.
If this does not stop the
water leak, detach the main
unit, and ask your dealer to
repair the product.
Stop the supply of hot water
immediately, and allow about
0.4 liter of water to flow
through the product (this
will take about 12 seconds).
(See page 15)
21

Advertisement

Chapters

Table of Contents
loading

Table of Contents