Technical Specifications - T+A HA 200 User Manual

Technical Specifications

Analog section
Frequency response + 0 / − 3 dB
Signal / noise ratio
THD / Intermodulation
Channel separation
Class A operation
Volume control
Loudness
Sound control
Headphone outputs
Analog inputs
High level (RCA) / balanced (XLR)
Digital inputs
Bluetooth
D/A converter section
PCM
DSD
Upsampling
Analog filter
Mains
Standby
Dimensions (H × W× D)
Accessories
Weight
54
0,1 Hz – 200 kHz
110/114 dB
< 0,001 % / < 0,001 %
> 108 dB
up to 700 mA
Relay controlled in 1 dB steps, - 60 dB to 0 dB
switchable, adjustable to the headphones efficiency
switchable, bass and treble -6 dB to + 8 dB
6.35 mm plug, 4.4 mm Pentaconn, XLR-4 pin
Impedances: 8, 12, 18, 25, 40, 80 Ohms
250 mV eff ... 4,5 V eff / 10 kOhms | 500 mV eff ... 9 V eff / 20 kOhms
1 x AES-EBU 32...192 kHz / 16-24 Bit
S/P-DIF: 2 x Standard Coax, 2 x optical TOS-Link 32...192 kHz /
16-24 Bit,
1 x BNC 32...192 kHz / 16-24 Bit,
2 x USB DAC: Device-Mode up to 768 kSps (PCM) and DSD1024*,
supports
asynchronous data transfer. *DSD 512 and DSD 1024 with Win-
dows PC and appropriate driver installed only.
2 x HDMI IN, 1 x HDMI OUT with ARC (as an option)
A2DP (Audio), AVRCP 1.4 (Control) / aptX
Double-Differential-Quadruple-Converter with four 32-Bit
Sigma-Delta D/A converter per channel, 705,6 / 768 kSps con-
version rate
T+A-True-1Bit DSD D/A converter, up to DSD 1024 (49,2 MHz), native
bitstream
T+A signal-processor – synchronous upsampling with four
selectable oversampling algorithms. FIR short, FIR long, Bezier/
IIR, Bezier, NOS (non-oversampling)
Phase-linear Bessel filter 3rd order, switchable with 60 or 120
kHz cut of frequency
200 – 240 V, 50 – 60 Hz, 100 Watts
< 0,5 Watts
10 × 32 × 34 cm, 4 x 12.6 x 13.4 inch
Remote control FM8, power cord, USB-cable for charging RC,
USB cable 2.0 for DAC, RCA cable, Bluetooth antenna
6,5 kg, 14.4 lbs
We reserve the right to alter technical specifications.
, SBC, AAC
® HD