Product Information
Strike Electrical Characteristics
The Strike modules electrically interfaces via a 4-wire terminated connector
protected with an outer PVC jacket. See
dimensions of the cable.
The electrical signal family of the Strike module is accessed via a
connectorized, jacketed cable. See
opto-electronic head have one connectorized lead while Strike II modules
with two opto-electronics heads have two identical connectorized leads.
*
* Wire colour can be Blue/Yellow or Green
Figure 3: Strike family signal family and connector
The electrical characteristics of the Strike module IO are listed in detail in
table
•
VCC is the power input to the module.
•
The enable is an input to the module to trigger the UV-LED to activate.
•
The health indicator is an output from the module signalling the module's
LED health status.
•
Ground acts as the return for VCC and the reference for the indication
and enable signal.
Advanced UV-LED Water Purification |
3.
acuvatech.com
Strike I and II UV-LED Water Disinfection Module
Figure 1
and
Figure 2
Figure
3. Strike I modules with a single
P R O D U C T M A N U A L
for
Page 6