Cpu Installation And Motherboard Handling - Aaeon IMBA-880 Manual

I n d u s t r i a l M o t h e r b o a r d

3.1 CPU installation and motherboard handling

Note: When integrating a Pentium 4 processor-based system, be sure to take the
proper electrostatic discharge (ESD) precautions.
Caution: Please follow the steps below to ensure proper installation of your
processor. Failure to follow these instructions may result in damage to your CPU
and/or your motherboard.
Retention
tab
Load
lever
Step 1: (Socket Preparation)
Note: Visually inspect to ensure that the socket protective cover is present and
securely fastened.
1. Opening the Socket:
Note: Hold corner of the load plate while opening and closing the load
lever. This will prevent the bounce back of the load plate which can
cause bent contacts.
a. Disengage the Load Lever by pressing down and
Chapter 3 CPU, Heatsink and Fan Installation
out on the hook allowing the lever to clear the
Retention Tab and rotate to the fully open position.
I M B A - 8 8 0
3-2
Protective Cover