Vacron SuperCapacitor Quick Start Manual

External Camera (optional)
SuperCapacitor Vehicle Video Recorder
TYPE A : Built-in GPS
TYPE B : External GPS (optional for G-mouse)
TYPE C : W/O GPS
120º
3"
100º
-10℃~45℃
CH1 / 1080P
Please contact your local dealer if you have any question on this product.
Standard 1. 5V cigarette Power adapter (miniUSB 3.5M)
2. PHONE JACK 4 ports 90 deg turn to micro din with extra wire 2.5M
3. Remote controller
5. Suction cup bracket
7. Quick user guide
Optional 1. 8G/16G/32G/64G/128G _Class 10 SD card
2. External GPS Mouse(4P Phone Jack Connect)
3. External 720P (AHD Interface)
4. Extra wire for MIC(4P Phone Jack Connect)
Installation Guide
1. Select suction-cups or stick-holder type bracket.
3M sticker
4. Plug in the DC5V
3. Adjust the view angle
power supply.
properly.
6. VVR Installation.
Best location
Notice
Cigar lighter
External Camera (optional)
Installation diagram
To stall External Camera with 4P Phone Jack Connect (1 Vp-p Composite
Video Output) in front or rear of the car.
Note: To avoid camera damage, please power
off the vehicle video recorder before plug the
camera in.
OPTIONAL
Google Map
4. Product Disc
6. Bracket holder
2. Find the optimal position
of device on the
windshield.
5. Plug in the cigarette
charger.
(1) This device should be installed in the area where
the windshield will be able to be cleaned.
(2) Formatting SD card on the device before beginning
to use.
(3) Set time zone and timing on OSD, or
auto-calibrating by GPS.
(4) NTSC or PAL setting through OSD.
(5) Electricity consumption: 500mA. If power supplied
by PC, please use Y Type USB Cable.
Definition of 4P Phone Jack connect
Negative
Signals
Positive
Product Diagram
Monitor On/Off
GPS positioning
SD card Slot
Green light: power
Red light: recording
Red light(fast flashing)：Enforced recording
CH2 External
camera plug
Safety Precautions
Please Take and review some testing videos initially to make sure the images were recorded correctly.
Please note that manufacturer, its subsidiaries and affiliates, and its distributors are not liable for
consequential damages arising from any malfunction of main device accessory, including memory
device that results in the failure of an image to be recorded or to be recorded in a way that is machine
readable.
Before using the product, please ensure that you read the safety precautions described below. Always
ensure that the product is used correctly.
• Use only recommended power sources.
• Do not attempt to disassemble, alter or apply heat to the product.
• DO not apply multi cigarette lighter adapters-Applying such devices will cause
unstable power input to damage the vehicle video recorder.
• Please always make sure all power connectors are fully secured.
• Avoid dropping or subjecting the product to severe impacts.
• To avoid the risk of injury, do not touch the interior of the product if it has been
dropped or otherwise damaged.
• Stop using the product immediately if it emits smoke, a strange smell, or otherwise
behaves abnormally.
CH2
• Do not use organic solvents such as alcohol, benzene, or thinner to clean the product.
• Do not let the product come into contact with water (e.g. sea water) or other liquids.
• Do not allow liquids or foreign objects to enter the VVR.
• Do not place the VVR near or in direct flame.
• Do not handle the power cord with wet hands.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories.
• Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.
• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.
• Avoid using, placing or storing the product in the humid or dusty areas.
For More Information
Please check VACRON Website
http://www.vacron.com
Made in Taiwan
Copyright@ FUHO Technology CO., LTD.
OSD Menu
Screen Spilt
Sleep mode
Time Setup
G-sensor
MIC ON/OFF
Format SD card
Restore
Version
SD Card Installation
3.SD card Format / SD card Restore.
(1). Recommend Memory Card class 10
or above (Minimum of 8GB)
(2). If SD card did not format by Player
Notice
before using, device will delete all
data inside and format it automatically (take
1~5mins). After it's done will start to record.
(3). Please do not convert Micro SD to SD card to
begin recording, to avoid the damage during
recording.
(4). Since memory cards have the writing
endurance situation, we recommend to
inspect the memory card and use pc for
playback regularly, to ensure that the memory
card can read and write.
(5). Some brand of SD card might not suit for
device, if it is not working please change other
brand SD card or Class.
(6). If SD card did not format by player, device will
delete all data and setup atomically. Some
devices will not able to recorded if SD card is
not format.
(7). SD card 8G、16G、32G、64G or 128G, after
format by Player. The space will only show up
for 80MB rest of memory space will be
displayed by Player only.
(8). Please backup data from SD card regularly.
Avoid losing data.
(9). When event happened, please take SD card
out and lock it. To avoid overwrite.
AV output/
GPS Mouse extra slot(optional)/
Extra wire for MIC(optional )
Mini USB
FOR PC
VACRON Player
Please go to VACRON Website to
download vacron viewer
*Reminder- DirectX 9.0 is required.
Remote Controller
1.Open SD card cover
on the device to insert
of remove SD card.
2.When not using SD
OSD
card, please close the
screen
cover to avoid dust or
on / off
other items get into
device.
Navigator
How to check if the remote
controller is workable?
Check the mercury cell is installed in

correct direction. (Check the pole)
Check if the cell power is exhaust.

Check if the sensor is covered.

Check if it nears by Fluorescent Lamp.

Recording & Stop Recording
1. Power on / Record
Turn on device and wait for around 20 sec ready
for recorded.
2. Power off / Stop record
After power off, wait for superconductor's supply
is off, when the power are all off. Take out SD card
for backup or format.
RTC battery cover
DC5V power input CH1 1080P Lens
2017 MAY. V1.0
H11A0N3700
Play
Emergency
REC
Menu
Enter
Stop