If You Need Service Or Assistance - Whirlpool RS675PW Use & Care Manual

3. Remove the light bulbirom
its
socket. Replace the bulb with a
40-watt appliance bulb.
4. Replace the bulb cover and snap
the wire holder in place. Plug in
appliance or reconnect at the
main power supply.
NOTE: The oven light will not work during the Self-Cleaning cycle.
If you need service or assistance,
we suggest you follow these five steps:
1.
Before calling for
assistance...
Performance problems often result
from little things you can find and fix
without tools of any kind.
If nothing operates:
l
Is the range wired into a live circuit
with the proper voltage? [See In-
stallation Instructions.)
l
Have you checked your home's
main fuses or circuit breaker box?
If the oven will not operate:
l
Is the Oven Selector turned to a set-
ting (BAKE or BROIL, but not TIMED
BAKE)?
l
Is the Oven Temperature Control
turned to a temperature setting?
If surface unlts will not operate:
l
Have you checked your home's
main fuses or circuit breaker box?
l
Are surface units plugged in all the
way?
l
Do the control knobs turn?
If surface unit control knob(s) will
not turn:
l
Did you push in before trying to turn?
26
It the Self-Cleaning cycle will
not
operate:
. Are the Oven Selector and Oven
Temperature Control set on CLEAN?
. Did you push the Self-Clean Button?
l
Is the Lock Lever all the way to the
right?
If cooklng results aren't what YOU
expected:
l
Is the range level?
. Does the oven temperature seem
toa low or too high? See page
12.
l
If needed, have you preheated the
oven as the recipe calls for?
l
Are you following a tested recipe
from a reliable source?
l
Are you using pans recommended
in the Cooking Guide?
. If baking, have you allowed lY2 to 2
inches (4-5 cm) on all sides of the
pans for air circulation?
. Are the pansthe size called for in the
recipe?
. Do the cooking utensils have
smooth, flat bottoms and fit the sur-
face unit being used?
See the Cooking Guide for more InfOr-
mation on cooking problems and
how to solve them.