Programming The Instant Priority Channel; Recalling The Instant Channel; Transmitting - Uniden UH8080NB Owner's Manual

Remote speaker mic uhf cb transceiver

Hide thumbs Also See for UH8080NB:

Table of Contents

Operation

Programming the Instant Priority Channel

Press

to select the Priority

Channel you prefer. Press and hold [INST]

for 2 seconds to store the new setting.

INST icon appears to designate the

Instant channel.

Momentarily press [INST] to return to

the Instant Channel. Press [INST] again to

return to the previous channel.

The UH8080NB transmits only on UHF-CB Channels.

frequencies and guidelines for their use and selection is printed on p.43

NOTE

Calls.

Select the desired channel. Press [PTT] on the side of the Remote LCD Speaker MIC

and speak normally into the microphone. Hold it approx. 7cm from your mouth. Release

[PTT] to end the transmission and listen for a reply.

UNIDEN UH8080NB

PTT

CALL

INST

UHF CB Transceiver

Table of Contents