Page 2
S19-110BFSS Installation IMPORTANT Read this installation manual completely to ensure proper installation, then file it Installation with the owner or maintenance department. Compliance and conformity to drain requirements and other local codes and ordinances is the responsibility of the installer.
Page 3
• Bottom edge of showerhead should be 84" (2134mm) from floor. Step 3: Connect water supply 41½" IMPORTANT: Do not rely on Bradley’s (1054mm) Combination Unit to support supply piping. 1. Connect water supply piping to 1¼" NPT inlet on unit (piping by installer). Provide adequate supports (by installer) for supply pipe using pipe hangers or other means.
Page 4
S19-110BFSS Installation Assembly of Components 1¼" NPT Supply Inlet NOTE: If tee (upper Item 5) is used as the supply inlet, then relocate coupling (Item 4) to this location. 12.1 12.2 12.11 ALIGN HANDLE 1¼" NPT PIECES Supply Inlet AS SHOWN P.O.
Page 5
Installation S19-110BFSS Parts List Item Part No. Qty. Description Item Part No. Qty. Description Ball Valve 1" with Jam Nut 131-062 Base 12.1 S27-276 Coupling Jam Nut only 269-1048 12.11 161-079 Pipe, Stainless Steel 1¼" NPT x 32" 113-1182 12.2...
Need help?
Do you have a question about the S19-110BFSS and is the answer not in the manual?
Questions and answers