Brymen BM039F User Manual page 16

GENERAL SPECIFICATIONS
Display: 3-5/6 digits 6000 counts
Polarity: Automatic
Update Rate: 5 per second nominal
Operating Temperature: 0C to 40C
Relative Humidity: Maximum relative humidity 80% for temperature up to 31C
decreasing linearly to 50% relative humidity at 40C
Pollution degree: 2
Storage Temperature: -20C to 60C, < 80% R.H. (with battery removed)
Altitude: Operating below 2000m
Temperature Coefficient: nominal 0.1 x (specified accuracy)/ C @(0C -- 18C or
28C -- 40C), or otherwise specified
Sensing: True RMS
Safety: Certified per IEC/EN/CSA_C22.2_No./UL standards:
61010-1 Ed. 3.0, 61010-2-032 Ed. 3.0, 61010-2-033 Ed. 1.0, & 61010-031 Ed. 2.0 to
Measurement Categories CAT III 600V and CAT IV 300V ac & dc
Transient Protection: 6.0kV (1.2/50s surge)
Overload Protections:
Current via Fork-clamp: 200Aac rms at <400Hz
Voltage via terminals: 660Vdc / 920Vac rms
Other functions via terminals: 600Vdc/Vac rms
E.M.C.: Meets EN61326-1:2013
ACA Functions, in an RF field of 1V/m:
Total Accuracy = Specified Accuracy + 40 digits at around 87MHz
DCA and Ohm Functions, in an RF field of 1V/m:
Total Accuracy = Specified Accuracy + 25 digits
Other Functions, in an RF field of 3V/m:
Total Accuracy = Specified Accuracy + 20 digits
Power Supply: 1.5V AAA Size battery X 2
Power Consumption: Typical 4mA
Low Battery Indication:
Below approx. 2.85V for Capacitance & Hz
Below approx. 2.5V for other functions
APO Timing: Idle for 32 minutes
APO Consumption: 5A typical
Dimension (LxWxH): 193 x 57 x 32mm
Weight: 158g
15