Initial Operation - Winix ZERO Pro User Manual

INITIAL OPERATION

Insert the unit plug into an electrical outlet.
①
ˍ The Control Panel lights will turn on and
off.
Press the 'Power' button.
②
Note
By default, when the unit first powers on, the
③
mode will be set to Auto with PlasmaWave
enabled.
ˍ When in Auto Mode the fan speed will
be automatically adjusted according to
the environments air quality.
®
ˍ PlasmaWave
airborne contaminants.
Note
English
ˍ During the first 4 minutes of power up, the Air Quality light
will flash as the Smart Sensors measure the air quality in the
environment, after which normal operation will begin.
works to remove harmful
ˍ In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
ˍ When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave ® , it is normal and does not signify product
failure. To disable PlasmaWave
®
® , see page 11.
ZERO Pro
9