REPLACING FILTERS
After replacing a filter, press the RESET button for at least 5 seconds.
CLEANING CARE
Cleaning the Filters:
Clean with a vacuum or a soft brush.
- Only clean the Pre-Filter.
- This filter CAN NOT be washed.
- Intervals between filter cleaning may vary depending on the air quality.
Cleaning the Smart Sensor (Dust Sensor):
Clean Smart Sensor (Dust Sensor) with vacuum cleaner.
- Cleaning interval: EVERY 2 MONTHS.
NOTICE
- Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.
Cleaning the Exterior & Interior:
Wipe with a soft damp cloth using room temperature water. Afterwards, wipe it down with a clean dry cloth.
After turning the product upside down, remove the filter cover and clean the interior with a vacuum cleaner.
- For optimal performance, clean every 14 days.
NOTICE
- When cleaning the unit, always unplug the power cord first and then wait until the unit has cooled down.
- Never disassemble, repair, or modify this unit yourself.
- Do not use flammable sprays or liquid detergents.
- Do not allow children to clean or maintain the unit.
- Before cleaning or maintaining, ensure unit is unplugged.
SAFETY AND CAUTIONS
Before operating this equipment, carefully read and follow these safety cautions.
Ensure filters are inserted before running unit Running the unit without filters may shorten the lifespan of the unit and cause electric shock or injury. Be sure foreign objects are NOT inserted into the vents on the unit
Objects can include pins, rods, and coins.
Do not touch any part of the interior of the unit with wet hands
The high voltage may cause electric shock.
Ensure unit intake and outlet vents do not become blocked Blockage may lead to increased internal temperatures causing product failure and deformation. Do not use the unit as a step stool or place heavy objects on it
Personal injury may occur or product failure and deformation.
When turning the product upside down, install the filter with care in the direction so that the bottom (blocked) side of the filter is visible from the top
If the filter direction is not installed properly, it may cause product damage and user injury.
Follow the instructions to reduce the risk of serious injury or death and to reduce risk of damaging the unit.
- If the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards.
- Children should be supervised to ensure that they do not play with the appliance.
- This unit is not intended to be used to preserve documents or in art conservation.
- Do not pull on the power cord when unplugging the unit.
- Do not tie or knot the power cord when unit is in operation.
- If the unit becomes submerged in water, unplug it and contact customer service.
- Do not unplug or move the unit while in operation.
- Do not plug additional appliances into the same outlet or power supply.
- Do not touch the plug with wet hands.
- Unplug the unit when not in operation for extended periods of time.
- Do not place around heating elements.
- Do not use around mist or fumes from industrial oil or around large quantities of metallic dust.
- The cord can become damaged by forcefully bending, pulling, twisting, bundling, pinching or placing heavy objects on it.
- Do not install in any sort of motor or transport vehicle. (trucks, boats, ships, etc)
- Do not place in an area with excessive amounts of noxious gases.
- Do not place near any flammable materials. (aerosols, fuel, gases etc)
- Do not have the unit facing into wind or drafts.
- Do not place below any electrical outlet.
- Do not place in excessively humid areas where the unit may become wet.
- To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
- Do not place unit closer than 30 cm from the wall during operation. It may cause condensation to the wall and the surrounding area.
SAFETY INSTRUCTIONS
Thank you for purchasing a Winix air purifier. This product is for household use only.
IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER
Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire.
- Do not repair or modify the unit. All repairs should be completed by a qualified technician.
- Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose.
- Use AC 220 - 240 V only.
- Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects on the power cord.
- Periodically remove dust from the power plug. This will reduce the risk of shock due to humidity build up.
- Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp by holding the plug itself, never hold by the cord.
- If the power plug is damaged, it must be replaced by the manufacturer or a qualified technician.
- Remove the power plug from the outlet when not in use.
- Do not handle the power plug with wet hands.
- Do not operate the unit when using indoor smoke- generating insecticides.
- Do not clean unit with benzene or paint thinner. Do not spray insecticides on the unit.
- Do not use the unit where it is humid or where the unit may become wet, such as the bathroom.
- Do not insert fingers or foreign objects into air intake or outlet.
- Do not use the unit near flammable gases. Do not use near cigarettes, incense, or other spark-creating items.
- Unit will not remove carbon monoxide emitted from heating appliances or other sources.
IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER
- Do not block the intake or outlet vents.
- Do not use near hot objects, such as a stove.
- Do not use where the unit may come into contact with steam.
- Do not use the unit on its side.
- Keep away from products that generate oily residue, such as a deep fryer.
- Do not use detergent to clean the unit.
- Do not operate without a filter.
- Do not wash and reuse the True HEPA Filter.
- Hold the handle on the back of the unit to transport.
- Do not hold by the front panel.
- Do not stick any small objects in the air outlet vents or fan.
FREQUENTLY ASKED QUESTIONS
The unit does not turn on at all
- Is the plug securely attached to the outlet?
- Make sure the outlet has power going to it, and ensure the plug is secured.
- Is there a power outage?
- Check to see if other lights and electrical equipment are working and try again.
The unit doesn't work in Auto Mode
- Has Auto Mode been selected?
- Press the Fan Speed button until Auto Mode is selected.
- Is the sensor blocked or clogged?
- Clean Smart Sensor (Dust Sensor) with vacuum cleaner.
It vibrates and makes a lot of noise
- Is it running on a slanted or uneven surface?
- Move the unit to a hard, flat, even area.
The power plug and outlet feel hot
- Is the plug securely plugged in?
- Make sure the plug is properly plugged into the outlet.
There is a strange smell
- Is it being used in a place with a lot of smoke, dust, or odors?
- Clean the air intakes on either side and clean the Pre-Filter.
- Replace the 360º All-in-One True HEPA Filter.
The fan strength is weak. The unit is not purifying the air
- Is the Check Filter Indicator light on?
- Change the filters as required.
The exterior, design, and product specifications may be changed without prior notice to improve product performance.
To expedite service, please specify the model name and number, the nature of the problem, your contact information, and your address.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Need Assistance?
Do you have a question about the AAPU500-JLE that isn't answered in the manual? Leave your question here.