Winix ZERO Pro User Manual page 14

FILTER CARE
2. Removing Filters
Ensure the unit is turned off and unplugged before removing filters.
※ The unit will automatically power off when front panel is opened.
① Remove the front panel by grasping its
upper edge and gently pulling towards
yourself.
ˍ To remove the front panel, the latch at
the lower edge of the panel must be
released from its position.
Press the tabs on the top edge to remove
②
the 1 Pre-filter.
③ First remove the
and then the 3 ,
Cleancel™ by pulling on the numbered tags
at the top of each filter.
NOTICE
English
2
AOC™ Carbon Filter
4 True HEPA filter with
ˍ For optimal performance, only genuine Winix filters should
be used with this unit.
Latch
Tabs
ZERO Pro
14