Table of Contents
Advertisement
1.2 I Technical specifications
1.2.1 Chlorinator
Nominal chlorine production
Nominal output current
Recommended mineral level -
minimum mineral level
Power supply voltage
Electrical power
Protection rating
Cell throughput (minimum/
maximum)
Maximum allowable pressure in
the cell
Operating water temperature
Frequency bands
Radio output power
1.2.2 Optional pH Link or Dual Link module
Supply voltage
Peristaltic pump flow rate
Maximum back pressure (injection)
pH and ORP sensor type
pH correction
pH minus dispensing
pH sensor calibration
ORP sensor tolerances
ORP sensor calibration
Sensor cable length
Hydroxinator®
Hydroxinator®
iQ 10
iQ 18
10 g/h
18 g/h
2.8 A
3.6 A
4 g/L - 3.3 g/L min.
2.400 GHz - 2.497 GHz
pH Link
Extra-low voltage (connected to the control box)
Combined (pH=blue/ORP=yellow)
pH minus only (hydrochloric acid or sulphuric acid)
1 point or 2 points (pH 4 and pH 7)
/
Hydroxinator®
iQ 22
22 g/h
5 A
110 - 240V
50-60 Hz
200 W maximum
IP43
5m³/h < 18m³/h
2.75 bar
5°C < 40°C
+19.5 dBm
Dual Link
1.2 L/h
1.5 bar
Proportional cyclic
10 ppm maximum
(shock chlorination)
1 point (470 mV)
3 metres
Hydroxinator®
iQ 35
35 g/h
7.2 A
EN
7
Hide quick links:
Advertisement
Table of Contents
