❸ Installing A Ph Link Or Dual Link Module; I Installing The Module - Zodiac Hydroxinator iQ Series Instructions For Installation And Use Manual

3.1 I Installing the module

• Turn the appliance off. Before beginning, disconnect all potential power supplies to the
appliance.
• Close the isolating valves in the pipework.
• Remove the cover and unscrew
module, see figure
• Remove the
Connect the 2 cables "SENS" and "PUMP" of the pH Link or Dual Link module to the chlorinator's terminals,
•
see figure .
Position the module on the chlorinator according to step
•
figure .
• Replace the cover, see figure
18
❸ Installing a pH Link or Dual Link module
(x2) the bottom module, see figure
.
.
.
and screw (x2) according to step , see