Table of Contents
Advertisement
2.5 I Electrical connections
Many devices can be connected to the control box in order to control the pool equipment (filter pump, lighting, auxiliary
systems, etc.).
The appliance must be permanently plugged in to the power supply (power supply protected by a 30 mA residual current
circuit breaker).
• Turn the appliance off. Before beginning, disconnect all potential power supplies to the
appliance.
EN
2.5.1 Accessing the electrical terminal blocks
• Make sure that the appliance is powered off.
• Remove the aesthetic housing from the control box (clipped in place), (see figure
).
• Remove the bottom protective cover from the appliance by unscrewing the 2 side screws (see figure
).
11
Hide quick links:
Advertisement
Table of Contents
