Rear Wheels - Kioti DK35 Manual

5-24 DK35/40/450L

REAR WHEELS

(1) Wheel Bolt (3) Disc
(2) Rim Bolt
The rear axle tread width are adjustable
from 1077 to 1437.6 mm (42.4 to 54.6 in.)
by changing the installation of the tire
(together with rim) to the disk, to suit the
type or condition of work. In either case,
the tire should be installed so that arrow
mark would show the direction of
rotation. Furthermore, the tire mark on the
ground should be in "V" shape.
To change the present tread to the de-
sired tread, all of the arrow mark would
show the direction of rotation.
Remove rim bolts, slide in peripheral di-
rection to move to outside or inside of
disk and set.
Change the left with the right tire, and
set to the inside or outside of the disk.
Change the direction of the disk.
IMPORTANT
Always attach tires as shown in
the above drawings.
If not attached as illustrated,
transmission parts may be dama-
615O530A
ged.
Wheel bolt torque
Rim bolt torque
DK35
26.6 ~ 31.0 kgf·m
260.9 ~ 304.0 N.m
192.4 ~ 224.2 lbf.ft
20 kgf·m
196.1 N.m
144.7 lbf.ft
615O531A