Replacement Of The Slow Blow Fuse - Kioti DK35 Manual

EU TYPE
IMPORTANT
Before replacing a blown fuse, de-
/
termine why the fuse blew and
make any necessary repairs. Fail-
ure to follow this procedure may
result in serious damage to the
tractor electrical system. Refer to
the troubleshooting section of
this manual or your local Kioti
Dealer for specific information
dealing with electrical problems.
615O649A
MAINTENANCE 6-29
REPLACEMENT OF THE SLOW BLOW
FUSE
(1) Slow Blow Fuse
Remove the coupling and replace the old
slow blow fuse with a new one.
CAUTION
The slow blow fuse serves to
protect electric wires. If it is cut
off, be sure to find the cause. Do
not use a substitute for it. Use
designated fuses only.
Capacity 60A
615O648A