Table of Contents
Advertisement
®
DUO-TOUCH
SG –
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection
Output Response Time
Indicators
Construction
Protection class (IEC-60529)
Connections
Ambient Light Immunity
EMI/RFI Immunity
Operating Conditions
Application Note
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Two-Hand-Control Kits with STB Touch Buttons
STB Touch Button Specifications
STBVP6 Models: 10 to 30V dc at 75 mA (exclusive of load)
STBVR81 Models: 20 to 30V ac/dc at 75 mA
Protected against transient voltages and reverse polarity
STBVP6 Models: Complementary PNP (sourcing) open-collector transistors
STBVR81 Models: Complementary electromechanical relays
STBVP6 Models (solid-state outputs):
Maximum load: 150 mA
Minimum on-state voltage: supply voltage – 1,5V at full load
Off-state leakage current: < 1 µA
STBVR81 Models (electromechanical relays):
Maximum voltage: 150V dc, 125V ac
Maximum switching current: 1A (resistive load)
Maximum switching power: 60 VA, 30W (resistive load)
Mechanical life of relays: 1 x 10
Electrical life of relays: at 6V dc, 100 mA – approx. 5 x 10
at 24V dc, 1A – approx. 3 x 10
All models protected against false pulse on power-up. Models with solid-state outputs have overload and short-
circuit protection.
20 milliseconds, maximum
2 green LED indicators:
Power: ON – power applied
OFF – power off
Output/fault:
ON – button is activated
OFF – button is deactivated
Flashing – internal fault or blocked button on power-up detected
Totally encapsulated, non-metallic enclosure. Black polysulfone upper housing (see Application Note below); fibre-
reinforced PBT polyester base. Electronics fully epoxy-encapsulated. Supplied with polypropylene field cover.
IP66
PVC-jacketed 2 m cables standard on integral-cable kits; or QD fitting, depending on model.
Accessory QD cables required for QD models; see Accessories, page 15.
STBVP6Q5 Models: 4-wire (4-pin Euro-style QD)
STBVR81Q6 Models: 5-wire (5-pin Euro-style QD)
Integral 9 m cables are also available; see model selection chart, page 1.
Up to 100.000 lux
Highly resistant to both single and mixed EMI and RFI noise sources, per IEC 947-5-2.
Temperature: -20° to +50°C
Maximum relative humidity: 90% at +50°C (non-condensing)
Environmental considerations:
The polysulfone upper housing will become brittle with prolonged exposure to outdoor sunlight. Window glass
effectively filters longer wavelength ultraviolet light and provides excellent protection from sunlight. Avoid contact
with strong alkalis. Clean periodically using mild soap solution and a soft cloth.
9
operations
7
operations
6
operations
13
page
Advertisement
Table of Contents
